The SMOK SPECIES 230W TC Starter Kit is the epicenter of SMOK’s technological process, empowering a new 1.45" OLED Colorful Touch Screen device with sophisticated design element to pair with the maximal mesh coils of the TFV8 Baby V2 Tank. The Species 230W Mod is the V2 or second generation of the alien creature, imposing a truly futuristic design with an upscale touch through angular lines and now-iconic cobra resin-dyed panel. The structure of the SMOK Species maintains an ergonomic, vertical-based design centered around the updated 1.45" OLED Touch Screen with newly interactive features. Maintaining the powerful performance chipset SMOK have come to known for, the Species can fire up to 230W of maximal power with preheat wattage values and full temperature suite such as TCR adjustments. The sophistication of the SMOK Species 230W Kit continues with the TFV8 Baby V2 Sub-Ohm Tank, featuring a 5mL maximum eJuice capacity, signature rotary top-fill, and massive triple bottom air slots. The crowning achievement lies within the hyper engines of the TFV8 V2 Coil Family, including a 0.17ohm Baby V2 A1 Single Coil with a large piece of mesh covering the cotton and a rating range of 90W to 140W. Each full set-up also comes with the 0.2ohm Baby A2 Dual Coil with two heating cores and a wattage setting of 50W to 80W. Destined to be one of the most desirable showcase of the year, the SMOK Species 230W Starter Kit absolutely lives up to its "Creature V2" name and truly is out of this world.

Dimensions - 82.1mm by 49mm by 30.6mm

Dual High-Amp 18650 Battery - Not Included

Wattage Output Range: 1-230W

Voltage Output Range: 0.5-8.2V

Min Atomizer Resistance: 0.06ohm

Temperature Range: 200-600F

Supports Ni200 Nickel, Titanium, and Stainless-Steel Heating Elements

Preheat Functionality - Soft, Normal, Hard, Max

Temperature Coefficient of Resistance (TCR) Adjustments

Superior Zinc Alloy Construction

Full-Color 1.45" OLED Touch Screen - New Interface

Universally Unique Identifier

Screen-Lock Button - Simplify Operation

User-Friendly Interface

Stealth Firing Bar Mechanism

Bottom-Loaded Hinged Battery Door

Intelligent Atomizer Recognition

Puff Monitoring System

10 Seconds Cut-Off

Short Circuit Protection

Over Heating Protection

Over Discharge Protection

Micro USB Port - 1.8A Charging Current

510 Connection

SMOK TFV8 Baby V2 Sub-Ohm Tank Features:

25.4mm Base Diameter

30mm At Widest Point

5mL Maximum Juice Capacity - Convex Glass Extension

Superior Stainless-Steel Construction

High-Grade Glass Reinforcement

High-Temperature Resistant - Explosion Proof

Convenient Top-Fill Rotary Design - Lock Button Mechanism

Massive Triple Adjustable Airflow Control at Base

810 Cobra Resin Ultra-Wide Drip Tip

Performance-Grade Baby V2 Coil System

0.17ohm Baby V2 A1 Single Coil - rated for 90-140W

0.2ohm Baby V2 A2 Dual Coil - rated for 50-80W

Antibacterial Medical Cotton

16mm Wide Delrin Wide-bore Drip Tip - Exclusive Fitment

Gold-Plated 510 Connection

Includes:

1 Species 230W Box Mod

1 TFV8 Baby V2 Tank

1 0.17ohm Baby V2 A1 Single Coil

1 0.2ohm Baby V2 A2 Dual Coil

1 Micro USB Cable

1 Instructional Manual

Important Notice

Sub-Ohm: Sub Ohm vaping is inherently dangerous and injury can occur if certain safety guidelines are not always followed. You must be also ensure that your batteries can handle sub ohm atomizers and coils. If you're using a regulated mod, make sure it can handle the amps.

Sub-Ohm coils are for experts, not average or beginner vapers with no multimeter or knowledge of how to use a meter, or when a meter must be used, or how electronic devices work. If the coils are not built or tested correctly this can irreparably damage your devices i.e. Mods, Batteries Tanks etc. and may also cause personal injury. These materials cannot safely be used by the inexperienced or those without basic knowledge of electronics, ohm's law, and amps!

Sub-Ohm coils will only work on a mechanical mod or a regulated mod capable of firing sub-ohm atomizers and coils.

This is because:
A coil MUST be tested carefully with a calibrated meter before it is used.
If it is not tested it may damage the device it is used on.
Faulty wicks/coils WILL blow electronic devices.
New coil/wick units must be tested and then used first on a strong basic electrical APV such as a Silver Bullet, that will not be destroyed by a short circuit.
No new coil/wick assembly should be used on an electronic device until known to be safe.
These items destroy electronic devices if faulty.
These items have inherent risks and may go faulty at any time even if they were originally in good working order. The owner bears the cost of equipment damaged as a result.
Make sure that your battery is either removed from your mod, or your mod is adequately locked when you are building your coils.

Mods:

"Mods" are by definition a modification to a design. There is a degree of risk inherent with any device that uses lithium type batteries. Some of the dangers are short-circuiting, reverse battery issues, and exceeding voltage limitations. Understanding how to handle and care for Lithium type batteries is very important and should always be practiced. Lithium type batteries are very sensitive to charging characteristics and may explode or flame if mishandled.

This is an advanced user device which is recommended for use by experienced vapers only. It requires you to have a strong technical knowledge of mods in order to use this device properly, and safely. Indy Vapor Shop will not be held responsible or liable for any injury, damage, or defect, permanent or temporary that may be caused by the use of any battery.

Indy Vapor Shop is not responsible for any device malfunctioning due to use by an inexperienced vaper who does not have the knowledge and understanding of how to use, and properly rebuild advanced e-cigarette devices.

Please have a basic understanding of the batteries you are using and how to care for them properly. Read the information found at: Battery University before purchasing.

It is important to carry batteries properly, recharge properly, and dispose properly.

Since we have no control over how a buyer uses the product; no guarantee, warranty, or return privilege will apply. The manufacturer may offer a limited warranty. Buyer shall be responsible for returning the product to the manufacturer. We regret having to strictly enforce this policy. The use of DIY liquid, improper chargers, modified atomizers, and general abuse of the product has made it necessary.

Please do not order if you do not understand and accept these terms.