Introducing the SMOK NORD 2 Pod Kit, a versatile pod system equipped with a 1500mAh battery, adjustable 1-40W max output, and comes with a NORD and RPM pod to support the respective coil options offered by SMOK. Upgrading many of the previous features, the Nord 2 Pod System can hold up to 4.5mL of eJuice within the refillable pod. Sold with two pods, the Nord 2 can support coils from both the Nord and RPM Coil Lines, accepted into the respective pod in a plug 'n' play manner for quick and easy installs or coil changes. In addition, the NORD 2 Kit maintains the same single button layout, adding a 0.69" OLED display screen to relay the wattage output and battery life, adjusting the wattage with the single firing button. With improved readability and upgrades to the useful original features, makes the SMOK NORD 2 Kit a fine successor to the classic Nord Pod System we all fell in love with.

SMOK NORD 2 40W Pod System Features:
Proprietary Intelligent Chipset
Dimensions - 95mm by 30.5mm by 20mm
Integrated 1500mAh Rechargeable Battery
Wattage Output Range: 1-40W
Voltage Output Range: 0.5V-4.0V
Resistance Range: 0.3-3.0ohm
Zinc-Alloy Chassis Construction
Single Button Operation - Firing & Wattage Adjustment
0.69"" OLED Display Screen
4.5mL NORD Pod - Supports NORD Coils
4.5mL RPM Pod - Supports RPM Coils
Ergonomic Mouthpiece
Side Fill System - Silicone Stoppered
SMOK Nord & RPM Coil Series
0.4ohm RPM Mesh Coil
0.8ohm Nord DC MTL Coil
Plug 'n' Play Coil Installation
Magnetic Pod Connection
Pod Detection
Short-Circuit Protection
8 Seconds Cut-Off
Low Voltage Protection
Micro USB Port

Includes:
1 Nord 2 Device
1 Nord 2 RPM Pod
1 Nord 2 Nord Pod
1 0.4ohm RPM Mesh Coil
1 0.8ohm Nord DC MTL Coil
1 Micro USB Cable
1 User Manual

Important Notice

Sub-Ohm: Sub Ohm vaping is inherently dangerous and injury can occur if certain safety guidelines are not always followed. You must be also ensure that your batteries can handle sub ohm atomizers and coils. If you're using a regulated mod, make sure it can handle the amps.

Sub-Ohm coils are for experts, not average or beginner vapers with no multimeter or knowledge of how to use a meter, or when a meter must be used, or how electronic devices work. If the coils are not built or tested correctly this can irreparably damage your devices i.e. Mods, Batteries Tanks etc. and may also cause personal injury. These materials cannot safely be used by the inexperienced or those without basic knowledge of electronics, ohm's law, and amps!

Sub-Ohm coils will only work on a mechanical mod or a regulated mod capable of firing sub-ohm atomizers and coils.

This is because:
A coil MUST be tested carefully with a calibrated meter before it is used.
If it is not tested it may damage the device it is used on.
Faulty wicks/coils WILL blow electronic devices.
New coil/wick units must be tested and then used first on a strong basic electrical APV such as a Silver Bullet, that will not be destroyed by a short circuit.
No new coil/wick assembly should be used on an electronic device until known to be safe.
These items destroy electronic devices if faulty.
These items have inherent risks and may go faulty at any time even if they were originally in good working order. The owner bears the cost of equipment damaged as a result.
Make sure that your battery is either removed from your mod, or your mod is adequately locked when you are building your coils.

Mods:

"Mods" are by definition a modification to a design. There is a degree of risk inherent with any device that uses lithium type batteries. Some of the dangers are short-circuiting, reverse battery issues, and exceeding voltage limitations. Understanding how to handle and care for Lithium type batteries is very important and should always be practiced. Lithium type batteries are very sensitive to charging characteristics and may explode or flame if mishandled.

This is an advanced user device which is recommended for use by experienced vapers only. It requires you to have a strong technical knowledge of mods in order to use this device properly, and safely. Indy Vapor Shop will not be held responsible or liable for any injury, damage, or defect, permanent or temporary that may be caused by the use of any battery.

Indy Vapor Shop is not responsible for any device malfunctioning due to use by an inexperienced vaper who does not have the knowledge and understanding of how to use, and properly rebuild advanced e-cigarette devices.

Please have a basic understanding of the batteries you are using and how to care for them properly. Read the information found at: Battery University before purchasing.

It is important to carry batteries properly, recharge properly, and dispose properly.

Since we have no control over how a buyer uses the product; no guarantee, warranty, or return privilege will apply. The manufacturer may offer a limited warranty. Buyer shall be responsible for returning the product to the manufacturer. We regret having to strictly enforce this policy. The use of DIY liquid, improper chargers, modified atomizers, and general abuse of the product has made it necessary.

Please do not order if you do not understand and accept these terms.