The
Joyetech Cuboid Mini Atomizer is the same tank as that in Cuboid Mini Kit which
features top filling and top airflow design (TFTA), detachable and washable
structure as well as multiple atomizer heads options. With its oblong shape,
the tank matches Cuboid Mini MOD perfectly. Top filling and top airflow control
system (TFTA).
Features:
5ml
capacity.
Top
airflow control.
Tempered
glass window.
Multiple
coil heads compatible.
Detachable
and washable structure.
Innovative
leak resistance cup design.
Size:
Height 47.5mm - Diameter 35.5mm.
The following
replacement coils are compatible with the Cuboid Mini Atomizer:
BF
SS316 Coil 0.5ohm and 1.0ohm.
BF
Clapton Coil 1.5ohm.
Ni200
Coil 0.2ohm.
SS316
Coil 0.6ohm.
NotchCoil
DL 0.25ohm.
Note:
Please drip at least 5 drops of e-liquid onto the head and inhale a
few times without pressing the fire button before its first use to avoid dry
burn.
Please don't overfill beyond the max to avoid overflow when
reassembled.
Contains:
Cuboid
Mini Atomizer (Without Coil).
Metal
mouthpiece.
Plastic
mouthpiece.
Manual
and warranty card.
Important
Notice
Sub-Ohm: Sub Ohm vaping is inherently dangerous and injury can occur if certain
safety guidelines are not always followed. You must be also ensure that your
batteries can handle sub ohm atomizers and coils. If you're using a regulated
mod, make sure it can handle the amps.
Sub-Ohm coils are for experts, not average or beginner
vapers with no multimeter or knowledge of how to use a meter, or when a meter
must be used, or how electronic devices work. If the coils are not built or
tested correctly this can irreparably damage your devices i.e. Mods, Batteries
Tanks etc. and may also cause personal injury. These materials cannot safely be
used by the inexperienced or those without basic knowledge of electronics,
ohm's law, and amps!
Sub-Ohm coils will only work on a mechanical mod or a
regulated mod capable of firing sub-ohm atomizers and coils.
This is because:
A coil MUST be tested carefully with a calibrated meter before it is used.
If it is not tested it may damage the device it is used on.
Faulty wicks/coils WILL blow electronic devices.
New coil/wick units must be tested and then used first on a strong basic
electrical APV such as a Silver Bullet, that will not be destroyed by a short
circuit.
No new coil/wick assembly should be used on an electronic device until known to
be safe.
These items destroy electronic devices if faulty.
These items have inherent risks and may go faulty at any time even if they were
originally in good working order. The owner bears the cost of equipment damaged
as a result.
Make sure that your battery is either removed from your mod, or your mod is
adequately locked when you are building your coils.
Mods:
"Mods" are by definition a modification to a
design. There is a degree of risk inherent with any device that uses lithium
type batteries. Some of the dangers are short-circuiting, reverse battery
issues, and exceeding voltage limitations. Understanding how to handle and care
for Lithium type batteries is very important and should always be practiced.
Lithium type batteries are very sensitive to charging characteristics and may
explode or flame if mishandled.
This is an advanced user device which is recommended
for use by experienced vapers only. It requires you to have a strong technical
knowledge of mods in order to use this device properly, and safely. Indy Vapor
Shop will not be held responsible or liable for any injury, damage, or defect,
permanent or temporary that may be caused by the use of any battery.
Indy Vapor Shop is not responsible for any device
malfunctioning due to use by an inexperienced vaper who does not have the
knowledge and understanding of how to use, and properly rebuild advanced
e-cigarette devices.
Please have a basic understanding of the batteries you
are using and how to care for them properly. Read the information found at: Battery
University before purchasing.
It is important to carry batteries properly, recharge
properly, and dispose properly.
Since we have no control over how a buyer uses the
product; no guarantee, warranty, or return privilege will apply. The manufacturer
may offer a limited warranty. Buyer shall be responsible for returning the
product to the manufacturer. We regret having to strictly enforce this policy.
The use of DIY liquid, improper chargers, modified atomizers, and general abuse
of the product has made it necessary.
Please do not order if you do not
understand and accept these terms.