The iJoy Vape SHOGUN UNIV
180W TC Box Mod is a sensational dual 18650 platform vape mod, integrating an
intelligent UNIV Chipset with highly functional output settings within a
stunningly designed resin panel construction. The iJoy SHOGUN 180W Mod
implements a compact box-like design with visually-pleasing resin colorways
that truly stands out amongst other modern vape kits. Powered by dual
high-amp 18650 batteries
(sold separately), the Shogun is capable of 180W output with the UNIV Chipset,
outputting maximal clouds with a near-instantaneous response. The UNIV Chipset
lends battery use efficiency, drawing power from the dual battery layout set
behind the magnetic battery bay doors. In addition, the UNIV chipset unlocks
various user modes to meet different vaping needs, such as PMODE, Pod Mode, and
Temp Mode to suit any vapers personal preference.
Please Note: The Ghostfire and
the Hellfire colorways can be extremely similar in display. Some might be
noticeable, while some looks like it can be passed for the same colorway.
Due to the nature of manufacturing,
design, and unique resin elements, each iJoy SHOGUN features a unique colorway
and patterning. Photos are for reference only.
iJoy
SHOGUN UNIV 180W Box Mod Features:
Dimensions - 88mm by 55mm by 28.4mm
Univ Chipset
Dual High-Amp 18650 Batteries - Not Included
Wattage Output Range: 1-180W
Voltage Output Range: 0-7.5V
Resistance Range: 0.05-3.0ohm
Temperature Range: 300°-600°F / 149°-316°C
Power Mode
POD Mode
PMODE
Temp Mode
Superior Zinc Alloy and Resin Chassis Construction
Intuitive Firing Button
Two Adjustment Buttons
0.96" OLED Display Screen
Short Circuit Protection
Low Power Alert
Battery Reverse Protection
PCB Temperature Overheat Protection
Low/High Resistance Protection
Switch Timeout Protection
Micro USB Charging Port
Centered Stainless Steel 510 Connection
Includes:
1 SHOGUN UNIV 180W Mod
1 Micro USB Cable
1 User Manual
1 Warranty Card
Important
Notice
Sub-Ohm: Sub Ohm vaping is inherently dangerous and injury can occur if certain
safety guidelines are not always followed. You must be also ensure that your
batteries can handle sub ohm atomizers and coils. If you're using a regulated
mod, make sure it can handle the amps.
Sub-Ohm
coils are for experts, not average or beginner vapers with no multimeter or
knowledge of how to use a meter, or when a meter must be used, or how
electronic devices work. If the coils are not built or tested correctly this
can irreparably damage your devices i.e. Mods, Batteries Tanks etc. and may
also cause personal injury. These materials cannot safely be used by the
inexperienced or those without basic knowledge of electronics, ohm's law, and
amps!
Sub-Ohm
coils will only work on a mechanical mod or a regulated mod capable of firing
sub-ohm atomizers and coils.
This
is because:
A coil MUST be tested carefully with a calibrated meter before it is used.
If it is not tested it may damage the device it is used on.
Faulty wicks/coils WILL blow electronic devices.
New coil/wick units must be tested and then used first on a strong basic
electrical APV such as a Silver Bullet, that will not be destroyed by a short
circuit.
No new coil/wick assembly should be used on an electronic device until known to
be safe.
These items destroy electronic devices if faulty.
These items have inherent risks and may go faulty at any time even if they were
originally in good working order. The owner bears the cost of equipment damaged
as a result.
Make sure that your battery is either removed from your mod, or your mod is
adequately locked when you are building your coils.
Mods:
"Mods"
are by definition a modification to a design. There is a degree of risk
inherent with any device that uses lithium type batteries. Some of the dangers
are short-circuiting, reverse battery issues, and exceeding voltage
limitations. Understanding how to handle and care for Lithium type batteries is
very important and should always be practiced. Lithium type batteries are very
sensitive to charging characteristics and may explode or flame if mishandled.
This
is an advanced user device which is recommended for use by experienced vapers
only. It requires you to have a strong technical knowledge of mods in order to
use this device properly, and safely. Indy Vapor Shop will not be held
responsible or liable for any injury, damage, or defect, permanent or temporary
that may be caused by the use of any battery.
Indy
Vapor Shop is not responsible for any device malfunctioning due to use by an
inexperienced vaper who does not have the knowledge and understanding of how to
use, and properly rebuild advanced e-cigarette devices.
Please
have a basic understanding of the batteries you are using and how to care for
them properly. Read the information found at: Battery
University before purchasing.
It
is important to carry batteries properly, recharge properly, and dispose
properly.
Since
we have no control over how a buyer uses the product; no guarantee, warranty,
or return privilege will apply. The manufacturer may offer a limited warranty.
Buyer shall be responsible for returning the product to the manufacturer. We
regret having to strictly enforce this policy. The use of DIY liquid, improper
chargers, modified atomizers, and general abuse of the product has made it
necessary.
Please do not order if you do not
understand and accept these terms.