The Coil Jig (RBA Coiler) will not only wrap your coil but also
serve as a building platform with its built in 510 connection.
A post storage compartment assures that you'll never lose your
posts.
Larger and heavier than most coil jigs to privide a more stable
platform.
The size is L(70mm)*H(32mm-40mm)*W(15mm).
Includes:
3 stainless steel posts : 1/16" (1.58mm).
3/32" (2.38mm).
1/8" (3.17mm).
Reinforced stainless steel screws.
Many excellent videos are available on youtube.com if you need
assistance.
Please note very carefully that rebuildable atomizer coils and
wicks have known risks.
Rebuildables are for experts, not average or beginner vapers
with no multimeter or knowledge of how to use a meter, or when a
meter must be used, or how electronic devices work. If the coils
are not built or tested correctly this can irreparably damage your
devices i.e. Mods, Batteries Tanks etc. and may also cause personal
injury. These materials cannot safely be used by the inexperienced
or those without basic knowledge of electronics.
This is because:
A rebuildable coil/wick MUST be tested carefully with a meter
before it is used.
If it is not tested it may damage the device it is used
on. Faulty wicks/coils WILL blow electronic devices.
New coil/wick units must be tested and then used first on a
strong basic electrical APV such as a Silver Bullet, that will not
be destroyed by a short circuit.
No new coil/wick assembly should be used on an electronic device
until known to be safe.
These items destroy electronic devices if faulty.
These items have inherent risks and may go faulty at any time
even if they were originally in good working order. The owner bears
the cost of equipment damaged as a result.
Make sure that your battery is either removed from your mod, or
your mod is adequately locked when you are building your coils.
Indy Vapor Shop will bear no responsibility or liability for
any damage to any devices used or any injury to persons using these
devices.
